Fix Firestick Optimizing System Storage Issue

Do you need to fix Firestick optimizing system storage issue? There are several factors that can be the reasons behind the Amazon Firestick optimizing system storage issue. They are lack of enough power, a damaged USB cable, damage in software, or an issue with the HDMI port. In order to fix the Firestick Optimizing system storage issue, you must go through several troubleshooting steps.

The Amazon Fire TV stick is a streaming device. By using this, you can connect a non-Smart TV to the internet. So, now you can access your favorite streaming platforms like Amazon Prime, Netflix, and Hulu. This list is not exhaustive. You need to power the Fire Stick, then connect it to the TV’s HDMI port, and connect it to your internet connection. Now you can use it. If you don’t like to upgrade your TV right now, but still need to enjoy streaming services, the best option you have is getting a Firestick device.

How to get Fire Stick out of the boot loop?

Fix Firestick optimizing system storage issue

You may experience stuck issues with Fire Stick when you optimize system storage and applications. As a result, you won’t be able to use your streaming device.

Following are the steps that you can follow to fix this Firestick optimization loop issue.

How to fix Firestick optimizing system storage issue

First solution: Unplug Firestick

When you have a Firestick optimizing system storage issue on your Fire TV, the very first thing that you need to do is unplug the Fire Stick from the USB cable and the HDMI port. After doing this, you will be able to see that Fire TV Stick disconnects from the TV, and the power supply will be cut off. Do not plug the HDMI and the USB cable immediately. Wait at least 5 minutes.

The above troubleshooting step will refresh your Amazon Firestick software and remove any software damages that have caused the issue.

Follow the below steps

  1. Disconnect the Fire Stick from the HDMI port. Moreover, remove the USB cable.
  2. Turn off the TV. Don’t rush. Wait at least 5 minutes.
  3. Now connect the Fire Stick to the HDMI port. And, connect the Micro USB with a power adapter.
  4. Now it is time to turn the TV on. Turn on the button of the power adapter as well and wait until it boots.
  5. After completing these steps, if you still see the optimizing screen, wait for another 10 minutes.

Check whether the Fire Stick optimizing system storage issue is still there.

Second solution: Using a different HDMI port might work for you

An issue with the HDMI port of your TV can be the problem. Try to connect your Fire Stick device to a different HDMI port and be sure to change the source using the TV remote or Fire Stick remote.

Don’t plug the Fire Stick into an HDMI switch or an extender. Plug it straight to the HDMI port of your TV.

Third solution: Use a different USB cable.

Not having enough power supply to your Fire Stick might be a common reason behind the Fire Stick optimizing system storage and applications message. This problem can happen if you have a malfunctioning USB cable that acts as the power cable or if your power supply is going through an issue.

First of all, change your current USB cable. If the problem is not solved even after that and you keep getting the Fire Stick optimizing system storage and applications message, try using a different power adapter. If you have the original power adapter of the Fire Stick, it would be great because this has the suitable power output that needs to drive the Fire Stick. If this is not the time for you to move to an original power adapter, be sure to use one that has an output of at least 1Amp.

USB port of your TV is not an option for this. So, don’t connect the Fire Stick to it. The power supply coming through it is not enough to drive the Fire Stick.

Connect the power adapter straight to the wall outlet. Don’t pass it through a power strip.

Fourth solution: Factory reset the Fire Stick

A glitch in the Firestick’s firmware can cause this error in the optimizing system storage and applications. To fix this, what you need to do is bring your Fire Stick back to its factory defaults.

Process of factory reset

Follow the below steps

  1. There are a back key and navigation key on your Fire Stick remote. Press and hold them for 10-15 seconds or until the confirmation box appears. When the confirmation box appears you will see a “Reset Factory Settings” message.
  2. Now click on “reset”.
  3. Wait till the reset process ends.
  4. Once the Fire Stick regains its default factory settings, check whether the optimizing system storage and application error are still there.

Fifth solution

If none of the aforementioned troubleshooting steps works, the issue might have arisen as a result of a hardware failure. Check whether you have a warranty for this. If yes, contact Amazon support and replace or repair your Fire Stick.

Fix Firestick Optimizing System Storage Issue

Frequently Asked Questions

1. Why does my FireStick remote not work?

There can be several reasons. The most obvious of them is batteries running out of charge. For this, you can either clean the battery connectors or use new batteries. Another reason might be that you might not have paired the FireStick remote already. So, try to pair it with the remote. Thirdly, the buttons of the Fire Stick might not be working. Fourthly, check whether your FireStick remote is suitable. Another reason is that the Fire Stick remote might have been damaged. This list is not exhaustive but these are the most common reasons.

2. Can a malfunctioning TV port cause FireStick’s optimizing system storage issue?

Yes. If there is a glitch in your TV’s port, it fails to go with the HDCP requirements of Amazon. Consequently, it will cause malfunctioning in the updated installation mechanism of FireStick.

3. Can I fix the Fire Stick optimization issue by plugging the Fire Stick into another TV?

Yes. Because of firmware updates, your TV might not be matching with your Fire Stick. So, in order to figure out whether the trouble is with your TV or Fire Stick, try plugging it into another TV.

4. What if none of the troubleshooting steps works in fixing the Fire Stick optimization issue?

Then there might be some hardware issues with your Fire Stick. In such an instance, what you need to do is get the assistance of an Amazon technician. If your current FireStick is under warranty, you can get it replaced with a new one.

Leave a Reply

Your email address will not be published. Required fields are marked *