Why won’t my Bluetooth speakers work with my Mac? This is How to Repair

Why won’t my Bluetooth speakers work with my Mac? This is How to Repair

fix Bluetooth speakers won’t with my Mac: Many people have complained that they can’t connect their Bluetooth speakers to their Macs. One of the following actions could occur if you are experiencing this issue:

  • Despite the fact that they appear to pair, the speakers cannot connect to the Mac.
  • The speakers kept going out of sync.
  • Even when the speakers attach, no sound is heard.
  • In the Bluetooth settings on the Mac, the speakers display “Not Connected.”
  • The audio is warped.

Speakers are necessary for a lot of Mac-related activities. You won’t be able to hear your Zoom meetings or watch YouTube videos if your speakers break down. There are numerous reasons why this issue might have arisen. While it’s possible that you have a hardware issue, you shouldn’t make any assumptions before taking the following actions. These issues are typically brought on by software and are simple to resolve.

How to fix Bluetooth speakers

Check these first before moving on to the more complex troubleshooting advice:

fix Bluetooth speakers won't with my Mac

Make sure the volume on your Mac is not muted or too low. Check sure your speakers are selected by going to the Apple menu, selecting System Preferences, clicking Sound > Output, and then selecting.
It is not set to a low output volume.

  • The checkbox for Mute is not checked.
  • Reboot your Mac and try one more.
  • Activate the Bluetooth speaker once again.
  • Turn Bluetooth off, then back on, in your Mac. Go to System Preferences > Bluetooth to accomplish that. Alternatively, you can toggle the switch by clicking the Bluetooth symbol in the menu bar.
  • Check to see if your Mac is running the most recent version of macOS.
  • Reset your Mac’s NVRAM or PRAM.
  • Remove your speakers from Bluetooth on your Mac, then re-add:
  • Activate System Preferences.
  • Click Bluetooth in System Preferences once it’s open.
  • The Bluetooth speaker of your choice.
  • The “x” should press. Choose Remove from the menu.
  • Reconnect it after you’ve disconnected it.

Turn off Bluetooth.

You might think about resetting the Bluetooth module on your Mac after attempting the simple methods listed above. When speakers continually disconnect, the module can be reset to resolve the issue. Two strategies exist for doing this. You can pick one to try:

Use of the Terminal is the first step.

On your Mac, launch Terminal (Applications > Utilities).
Hit enter after entering the following command:

fix Bluetooth speakers won't with my Mac

Restart your computer, then re-pair your speakers with your computer.
The Bluetooth list file can also delete.

Launch Finder.
Click Go, then Go to Folder, in the top menu bar. Click “Go” after entering the following.

fix Bluetooth speakers won't with my Mac

Secure Mode

The issue could resolve by restarting your Mac in Safe Mode. Test your Bluetooth speakers while your Mac is in Safe Mode, exit Safe Mode, and then test them once more.

  • Go to About This Mac under the Apple menu. To find out if your Mac has an Intel or Apple silicon CPU, look in the Overview tab.
  • Turn off your Intel Mac if you have one. Once your Mac has started, press and hold the Shift key until the login screen appears.
  • Turn off your Mac if it has Apple silicon. Press and hold the Shift key while selecting your startup disk and choosing “Continue in Safe Mode.”
  • Register on your Mac. If you have to log in more than once, that is normal.
  • Safe Mode is now active on your Mac. In Safe Mode, your Mac might operate slower. This is also typical. Your Bluetooth speaker is it functional?
  • Shut off Safe Mode. Your Mac can restart to accomplish that.
  • Once more, check your speaker.

Your speaker has been factory reset

Reset the speaker to factory settings if the problem persists. Each Bluetooth speaker has a method for being reset. But, depending on the manufacturer, the process might be different. Typically, it requires hitting many buttons in succession. There might occasionally be a reset pinhole. Sometimes, you might have to hold down the power button for 10 seconds. To find out how to do this, you need to speak to the maker of your device or read the manual. You will have to pair your speakers once more after the reset.


Why won’t my Bluetooth speaker on my Mac work?

The majority of issues can resolve by disconnecting and repairing the Bluetooth device, swapping out the device’s batteries, restarting your Mac, or carrying out an SMC reset. The Bluetooth module on your Mac can always reset if none of the other techniques work. Here’s how to use the elusive Bluetooth Debug menu in macOS.

How can I restart my Mac’s Bluetooth?

While holding down Shift and Option, select the Bluetooth icon from the menu bar. Resetting the Bluetooth module is the secret option you should select. Choose Debug > Reset the Bluetooth module on macOS Catalina and before.

Why won’t my Mac’s speakers connect?

Ensure that the display’s cords are attached to Mac’s ports. Choose Apple menu > System Settings on your Mac, then click Sound in the sidebar. You might have to scroll down. Make sure [Mac model] Speakers are chosen in the output device list by clicking Output on the right.

Bluetooth is connected, but why is there no sound?

Check to see if the speaker is connected to the Bluetooth device. Reconnect the speaker and Bluetooth device. The speaker or BLUETOOTH device volume could be too low. Set a reasonable volume for the music.

Why won’t my Bluetooth play music despite connecting?

Decide on a default playback system.

You may have correctly paired your Bluetooth headphones but failed to set them as the default audio device if the sound is still coming from the PC even though your Bluetooth headphones are attached.

How do I get my Mac to use my Bluetooth speaker to play sound?

Click Bluetooth under System Preferences in the Apple menu on your Mac.
Alternatively, if the Bluetooth icon is present, navigate to the top menu bar and select it.

Your Bluetooth list should show your speakers or headphones if you have successfully entered pairing mode.

Leave a Reply

Your email address will not be published. Required fields are marked *